INFORMATION FOR. INTERLINE Colour. Gloss Level. Volume Solids. Typical Thickness. Theoretical Coverage. Practical Coverage. Method of Application. PRODUCT DESCRIPTION. A two pack epoxy holding primer. Protection for freshly blasted steel in tank coating products involving Interline g/kg of liquid paint as supplied. EU Solvent Emissions Directive (Council. Directive /13/EC). Interline Epoxy Tank Holding Primer.
|Published (Last):||14 July 2018|
|PDF File Size:||12.93 Mb|
|ePub File Size:||17.61 Mb|
|Price:||Free* [*Free Regsitration Required]|
A two pack epoxy holding primer.
Allows for more flexible working procedures whilst not detracting from the chemical resistance of the completed coating scheme. VOC values are typical and are provided for guidance purposes only. These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances. Based on this, products supplied in different territories may not be approved to all of the standards listed above. Consult your International Paint representative for details.
Consult your International Paint representative for the system best suited for the surfaces to be protected. Use in accordance with the standard Worldwide Marine Specifications.
All surfaces itnerline be coated should be clean, dry and free from contamination. High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning.
Interline | Litnobiles
Consult your International Paint representative for specific recommendations. Material is supplied in 2 containers as a unit. Always mix a complete unit in the proportions interpine. Use International GTA only in exceptional circumstances.
DO NOT thin more than allowed by local environmental legislation. Recommended Tip Range 0. Application by brush is recommended for small areas only. Multiple coats may be required to achieve specified film thickness. Application by roller is recommended for small areas only.
Do not allow material to remain in hoses, gun or spray equipment. Thoroughly flush all equipment with International GTA Once units of paint have been mixed they should not be resealed and it is advised that after prolonged stoppages work recommences with freshly mixed units.
Clean all equipment immediately after use with International GTA It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature, relative humidity and elapsed time, including any delays.
Do not exceed pot life limitations. In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation. Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels. If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product.
Proper ventilation and protective measures must be provided during application and drying to keep solvent vapour concentrations within safe limits and to protect against toxic or oxygen deficient hazards. Take precautions to avoid skin and eye contact ie. Actual safety measures are dependant on application methods and work environment.
International Paint should be consulted to confirm that the tank coating is suitable for the range of cargoes to be carried. The drying times and overcoating intervals may alter due to various on-site factors such as tank configuration and ventilation rates. The history and age of the steel and the method of working can have a significant effect on the paint consumption.
Overcoating information is interpine for guidance only and is subject to regional variation depending upon local climate and environmental conditions. Consult your local International Paint representative for specific recommendations. Apply in good weather. Unmixed material in closed containers should be maintained in protected storage in accordance with information given in the STORAGE Section of this data sheet.
Technical and application data herein is for the purpose of establishing a general guideline of the coating application procedures. Test performance results were obtained in a controlled laboratory ijterline and International Paint makes no claim that the exhibited published test results, or any other tests, accurately represent results found in all field environments.
As application, environmental and design factors can vary significantly, intreline care should be exercised in the selection, verification of performance and use of the coating.
Marine Coatings Marine chemicals Marine lubricants. Interline A two pack epoxy holding primer. Products Marine Coatings Marine chemicals Marine lubricants.
Petersburg, Russia, phone: Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat and ignition.